Standards And Certifications - Packard Bell EASY DVD User Manual

Easy DVD User's Guide
VIII. Standards and Certifications
European notice
Products with the CE marking comply with both the Electromagnetic Compatibility
Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) - modified by
the Directive 93/68/EEC - issued by the Council of the European Communities.
Compliance with these directives implies conformity to the following European
Standards:
EN55022 (1994+A1:1995+A2:1997): Radio disturbance characteristics
EN55024 (1998+A1:2000): Immunity characteristics
EN61000-3-2 (2000): Limitation of harmonic current emissions
EN61000-3-3 (1995+A1:2001): Limitation of voltage fluctuation and flicker in low-
voltage supply system
EN60950 (2000): Product Safety. If your product includes a telecommunication
network board, the input/output socket is classified as Telecommunication
Network Voltage (TNV-3).
Modifications to the Product
CE marking
NEC Computers International BV cannot be held responsible for unauthorised
modifications made by the user and the consequences thereof, which may alter
the conformity of the product with the CE Marking.
Radio frequency interference
The manufacturer is not responsible for any radio or TV interference caused by
unauthorised modifications to this equipment.
Power Supply and Cables
Power supply
The power supply socket-inlet is classified as Hazardous Voltage.
You must unplug the power supply cord to disconnect the equipment from the
power supply. In that aim, the socket-outlet should be installed near to the
equipment and should be easily accessible.
Under no circumstances should the user attempt to disassemble the power supply.
The power supply has no user-replaceable parts. Inside the power supply are
hazardous voltages that can cause serious personal injury.
41