Precautions; Safety And Operating Precautions; Disc Care; Ii. Precautions - Packard Bell EASY DVD User Manual

Easy DVD User's Guide

Safety and operating precautions

Power requirement for this appliance is AC 220-240V, 50/60 Hz. Please ensure
the power supply to your home is in this range.
The temperature of the top cover and rear panel of the recorder may be high
after playing for a long period of time. This is normal.
When the recorder is not in use, please remove the disc and turn the power
off.
Malfunctions may occur if the recorder has not been used for a long period of
time. For best results, turn it on occasionally.
Some kinds of discs may cause the unit to hang or freeze. Please restart the
unit when this occurs. Wait at least 10 seconds before restarting to extend
the life of the recorder.
This DVD recorder is a device of high technology and high precision. The
image quality may be impaired when the laser head or the disc driving parts
are dirty or damaged.
Do not use the Easy DVD where condensation may form easily, as this may
damage the disc and inner parts of the recorder.
Place the appliance in a location with adequate ventilation to prevent
internal heat build up. 5cm.
Use a soft and dry cloth for cleaning. For the stains that cannot be removed
easily, apply some diluted neutral detergent to a cloth, wring the cloth dry
and wipe the stains away, then use a dry cloth to clean. Do not use any
solvents such as thinner or benzene; as this may damage the Easy DVD.

Disc care

Periodically clean the disc to remove any dust or fingerprints. Use a soft,
scratch-free cloth or a commercial disc cleaner.
To keep the disc free of fingerprints, hold the disc with your fingers on the
outer edge or with a finger in the inner circle and a finger on the outer edge.
Always return the disc to its protective case or sleeve when you have finished
using it.
Keep the disc tray closed whenever you are not using the drive.

II. Precautions

4