Table of Contents
Advertisement
INPUT LINE CORD/POWER CORD
The input power cord needs to connect into a socket on the wall. Please notice the voltage
of utility power should match with the UPS. For example, the rated voltage of the UPS is
120V so the input utility power should also be 120V.
INPUT CIRCUIT BREAKER/FUSE
The breaker trips when the connected loads exceed the protected receptacle's capacity.
The center plungers of the circuit breakers/fuse enable when tripped. If the breaker trips,
remove some of the load, then reset it by pressing the breaker in.
UPS (BATTERY BACKUP) OUTLETS (NEMA 5-15R)
When utility power is normal, the UPS outlets are powered by utility power without the AVR
function. Any higher or lower utility power would be rectified by the AVR function. When
utility power fails, the UPS outlets are powered from battery.
SURGE SUPPRESSION OUTLETS (NEMA 5-15R)
These outlets offer surge suppression only for less critical desktop/computer accessories.
TPX Series UPS 700VA Operational Manual – 97673-000
14
Advertisement
Table of Contents
