- Node No. switch
Please set node no. with the Node No. switch that is used as the low rank value of Internet Protocol address.
192.168.250. **.
Item
Setting method
Setting range
- Mode switch
Please set the mode of FL REMOTE ID with the mode switch.
No
Name
0
Trigger mode
1
Auto mode
2
Test mode
others
-
Description
two BCD rotary switches
01 to 31
Description
When the trigger signal is input from the plc, FL REMOTE
ID begins the communication with the ID tag, and outputs
the communication result to the plc.
When the ID tag approaches the antenna front, FL REMOTE
ID begins the communication with the ID tag, and outputs
the communication result to the plc.
FL REMOTE ID repeatedly executes the ID Tag read of eight
bytes from 00 addresses without the control from the plc
mode error