Advertisement
General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to use this
feature.
A zone is a group of channels. The following methods are
options on how to select a radio zone. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and the
programmed functions.
Select a zone via the radio menu Zone:
•
to Zone and press the Menu Select
a.
or
button directly below Zone.
b.
or
to the required zone, or use the
keypad to enter the zone number.
If the zone number entered is unprogrammed, the
display shows Invalid entry. Repeat this step.
c. Press the Menu Select button directly below Sel
to confirm the displayed zone.
Send Feedback
d. Press the PTT button to transmit on the displayed
zone channel.
Select a zone via the radio menu ZnUp or ZnDn:
•
to ZnUp or ZnDn.
a.
or
b. Press and hold the Menu Select button directly
below ZnUp or ZnDn until the required zone
appears.
Positions of ZnUp and ZnDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c. Press the PTT button to transmit on the displayed
zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following methods
are options on how to select a radio channel. The result of
all the methods is the same. You can use the options
interchangeably depending on your preference and the
programmed functions.
•
Select a channel via the preprogrammed 16–
Position Select Knob to the desired channel.
English
69
Advertisement
