Advertisement
The pairing process can be canceled by pressing the
Menu Select button below Cncl.
If successful, the display shows Pairing in
progress,<Device Friendly Name> paired,
Connecting in progress... followed by <Device
Friendly Name>connected. The display returns to
the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will
occur:
The display shows <Device Friendly Name>
•
PIN auth fail (if the PIN numbers are
different).
<Device Friendly Name> connect failed (if
•
the connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio
The following methods are options on how to turn on the
Bluetooth audio. The result of all the methods is the same.
Send Feedback
You can use the options interchangeably depending on
your preference and the programmed functions.
Turning on the Bluetooth audio via radio menu BT:
•
to BT. Press the Menu Select button
a.
or
directly below BT to access the Bluetooth feature
screen.
to Bluetooth spkr and press the
b.
or
Menu Select button directly below On.
The display shows On.
c. To return to the Home screen, press the Menu
Select button directly below Exit.
•
Turning on the Bluetooth audio via the
preprogrammed button:
a. To route the audio routing from the radio to the
headset, short press the preprogrammed button.
You hear a short, medium-pitched tone. The
display shows Headset on.
BT audio routing can be configured in CPS to route
the audio to Remote Speaker Microphone (RSM)/
radio's internal speaker. The audio routes to the
radio's speaker if RSM is not connected. Check with
English
171
Advertisement
