Cisco TelePresence DX70 and DX80
Introduction
xCommand Video PresentationView Set
Set the presentation view mode
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationView Set View:
where
View
: Default/Maximized/Minimized
Select Default when you want the presentation to be viewed with the default settings
for the codec. Select Maximized when you want the presentation to be displayed in full
screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
xCommand Video Selfview Set
Sets self-view on/off and specifies its size and position. If the parameter is not specified,
current value is used.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Selfview Set [Mode: Mode] [FullscreenMode: FullscreenMode]
[PIPPosition: PIPPosition] [OnMonitorRole: OnMonitorRole]
where
Mode
: On/Off
Selfview is set to on or off.
FullscreenMode
: On/Off
Choose between displaying the self-view in full screen or as picture-in-picture.
PIPPosition
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
UpperRight
Select the position for the self-view image.
OnMonitorRole
: First/Fourth/Second/Third
Displays self-view on monitors with this role.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
View
xCommand
xCommand
139
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.