Weed Eater BC3100 Operator's Manual
  1. Manuals
  2. Brands
  3. Weed Eater Manuals
  4. Trimmer
  5. BC3100
  6. Operator's manual
Weed Eater BC3100 Operator's Manual

Weed Eater BC3100 Operator's Manual

Weed eater trimmer operator's manual
Hide thumbs Also See for BC3100:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
Enlarged version
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l'outil au détaillant.
1-800-554-6723
www.weedeater.com
Manuel de l'utilisateur
U L
R
DANGER:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual del operador y siga todas las advertencias e instruc-
ciones de seguridad. El no hacerlo puede resultar en lesiones graves.
AVERTISSEMENT:
Lire le manuel de l'utilisateur et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Electrolux Home Products, Augusta, GA 30907
WCI Outdoor Products, Inc.
R
Trademark
Operator's Manual
Manual del Operador
BC3100
530087645
8/31/00

Advertisement

Table of Contents
loading

Related Manuals for Weed Eater BC3100

Summary of Contents for Weed Eater BC3100

  • Page 1 Lire le manuel de l’utilisateur et bien respecter tous les avertisse- ments et toutes les instructions de sécurité. Tout défaut de le faire pourrait entraîner des blessures graves. Electrolux Home Products, Augusta, GA 30907 WCI Outdoor Products, Inc. Trademark BC3100 530087645 8/31/00...

  • Page 2: Safety Rules

    Wear eye and leg protection. Hazard Zone 50 Feet (15 Meters) WARNING: Hazard zone for thrown objects. Blade/Trimmer line can throw objects violently. Others can be blinded or injured. Keep people and animals 50 feet (15 meters) away. WARNING: Do not use trimmer head as a fastening device for the blade.
  • Page 3 S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury. S Be sure blade or trimmer head stops turning when engine idles. S Disconnect the spark plug before perform- ing maintenance (except carburetor adjust- ments).
  • Page 4 (1) long hex key wrench (1) short hex key wrench (1) bracket cover shield for use with blades shield for use with trimmer head semi-automatic trimmer head shoulder strap with warning brush blade handlebar container of oil Examine parts for damage.
  • Page 5 S If your unit has a plastic cover over the threads on the threaded shaft, remove the covering to expose the threads. S Before installing the trimmer head, make sure the dust cup and retaining washer are positioned on the gearbox as shown below.
  • Page 6 HEAD and reverse the steps to remove the plastic shield and trimmer head before you mount the metal shield and blade. Store these parts for future use. Never use the trimmer head with the metal blade installed. ASSEMBLY OF THE METAL SHIELD...

  • Page 7: Starting Your Engine

    Gasoline must be mixed with a good quality 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand oil is recommended. (A 40:1 ratio is ob- tained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline).

  • Page 8: Starting A Warm Engine

    The cutting line will last longer and will be less likely to “weld” onto the spool. If the trimmer head does not turn when the en- gine is in operation, make sure the drive shaft housing is properly seated in engine shroud.

  • Page 9: Replacing The Line

    S WHAT CAUSES BLADE THRUST Blade Thrust can occur when the spinning blade contacts an object that it does not cut. This contact causes the blade to stop for an instant and then suddenly move or “thrust” away from the object that was hit. The “thrusting” re- action can be violent enough to cause the op- erator to be propelled in any direction and lose control of the unit.

  • Page 10: Need Assistance

    SERVICE We recommend all service and adjustments not listed in this manual be performed by an Authorized Service Dealer. CARBURETOR ADJUSTMENT Your carburetor is equipped with limiter caps. Damage will occur if you turn the needles be- yond the limiter caps. Carburetor adjustment is a complicated task.

  • Page 11: Limited Warranty

    POULAN/WEED EATER must warrant the emission control system on your lawn and garden equipment engine for the periods of time listed below provided there...

  • Page 12: Warranty

    OR REPLACEMENT OF PARTS. Repair or replacement of any warranted part will be performed at no charge to the owner at an approved POULAN/WEED EATER servicing center. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized...

Table of Contents