Carrier 50HS018 Installation, Start-Up And Service Instructions Manual page 6

PART NUMBER
CPRFCURB001A00
Flat CPRFCURB002A00
CPRFCURB003A00
NOTES:
1. Roof curb must be set up for unit being installed.
2. Seal strip must be applied as required for unit being installed.
3. Dimensions in [ ] are in millimeters.
4. Roof curb is made of 16 gage steel.
5. Attach ductwork to curb (flanges of duct rest on curb).
6. Service clearance 4 ft on each side.
7. Direction of airflow.
8. Insulated panels: 1-in. thick fiberglass, 1-lb density.
''A''
8 [203]
11 [279]
14 [356]
Fig. 6 — Roof Curb Dimensions
6