Update of PROFIBUS labels
This function creates and updates the structures used for global labels and module function blocks by enabling the refresh
settings.
1.
Click "Update PROFIBUS Label".
[Navigation window] [Parameter] [Module Information] [RJ71PB91V] [PROFIBUS Module Setting]
[PROFIBUS Configurator Tasks]
2.
Convert some program codes or all program codes.
[Convert] [Convert] or [Rebuild All]
3.
Write the set parameters to the CPU module or an SD memory card in the CPU module. Then reset the CPU module or
power on the system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R PROFIBUS-DP Module User's Manual (Application)
7 COMMUNICATION EXAMPLE
7.1 Communication example of data exchange
7
37