Mitsubishi Electric RJ71PB91V-U-IN-E User Manual page 35

PROFIBUS module setting
1.
Start PROFIBUS Configuration Tool from the engineering tool.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PB91V]  [PROFIBUS Module Setting]
2.
Add the DP-Slave to the project.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PB91V]  [PROFIBUS Module Setting]  [Global
GSD Database] tab  Target DP-Slave  Right-click  [Add Slave to Project]
3.
Set the items in the "Slave Settings" window as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PB91V]  [PROFIBUS Module Setting]  Target
DP-Slave  Right-click  [Slave Settings]
• DP-Slave (FDL address 1)
7 COMMUNICATION EXAMPLE
7.1 Communication example of data exchange
7
33