Advertisement
Page 2
Left:
Previous fuel tank 4180 350 0424 or
4180 350 0425 and toolless filler cap
0000 350 0535
Right:
New fuel tank 4180 350 0431 and
threaded filler cap 0000 350 0517
1.1.1
Warning pictogram filler cap
At the same time, the previous pictogram
0000 967 3605 is being replaced by the version
0000 967 7222.
1.1.2
Spare parts
As a replacement part, the new fuel tank includes
the threaded filler cap and the pictogram
0000 967 7222. Thus the new fuel tank can also be
used with older machines.
The previous fuel tanks will no longer be available
from the factory. The previous toolless filler cap
0000 350 0535 and the previous pictogram
0000 967 3605 remain available for older machines
with the previous fuel tank.
1.1.3
Service notes
If the new fuel tank with the threaded filler cap is
installed while the machine is being serviced, the
included pictogram 0000 967 7222 must be
attached to the shroud.
After all service work on the machine, always check
the condition of the warning pictograms. Add or
replace warning pictograms if necessary.
Technical Information 10.2011
1.2
Shroud, pictogram
The previous shroud 4180 080 1604 with pictogram
0000 967 3605 is being replaced by the shroud
4180 080 1605. The new shroud includes the
previous pictogram 0000 967 3605, the new
pictograms 0000 967 7222 and 0000 967 4055.
1.2.1
Spare parts
Only the new shroud is still available as a spare part.
The new shroud includes the previous pictogram
0000 967 3605 (toolless filler cap), the new
pictogram 0000 967 7222 (threaded filler cap) and
pictogram 0000 967 4055 (spark arresting screen).
The previous shroud will no longer be available from
the factory.
1.2.2
Service notes
If a new shroud is installed while the machine is
being serviced, the appropriate pictogram for the
filler cap must be attached to the shroud, depending
on the fuel tank in use.
TI_10_2011_30_01_01.fm
Advertisement
