Playing A Tape; Recording On A Tape - Sony CFD-E90 Service Manual

Playing a tape

1
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press n.
The player turns on (direct power-on)
and starts playing.
8

Recording on a tape

1
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the program source you want
to record.
To record from the CD player, insert
a CD and press x on the CD section.
To record from the radio, tune in the
station you want.
10
2
With the side you want
to play facing you
Display
3
With the side you want to
record on facing you
Display
Use these buttons for additional operations
To
adjust the volume
stop playback
fast-forward or rewind the tape
pause playback
eject the cassette
turn on/off the player
* VOLUME + and n have a tactile dot.
3
Press z to start recording
(n is depressed automatically).
Use these buttons for additional operations
Tips
To
¥ Adjusting the volume or the
stop recording
audio emphasis will not
affect the recording level.
pause recording
¥ If the AM program makes a
whistling sound after you've
¥ If the AM program makes a
pressed z in step 3, press
whistling sound after you've
turn on/off the player
pressed z in step 3, press MODE to select the
position of ISS
MODE to select the
(Interference Suppress
position of ISS
Switch) that decreases the
(Interference Suppress
noise the most.
Switch) that decreases the
¥ For the best results, use the noise the most.
AC power as a power
¥ For the best results, use the
source.
AC power as a power
¥ To erase a recording,
source.
proceed as follows:
¥ To erase a recording,
1 Insert the tape whose proceed as follows:
recording you want to
1 Insert the tape whose
erase.
recording you want to
2 Press FUNCTION on the erase.
remote repeatedly until
2 Press FUNCTION on the
TAPE appears.
remote repeatedly until
3 Press z.
TAPE appears.
3 Press z.
CFD-E90
POWER
VOLUME +, —
m, M
xZ
X
Press
VOLUME +*, —
(VOL +, — on the remote)
xZ
m or M
X
Press the button again to
resume play after pause.
xZ
POWER
9
POWER
MODE
n
xZ
X
Press
xZ
X
Press the button again to resume
recording.
POWER
11
7