Lenovo ThinkPad P70 User Manual page 87

Table 2. Config menu items (continued)
Menu item
Display
Submenu item
F1–F12 as primary function
Fn Sticky key
Boot Display Device
Graphics Device
Value
• Disabled
• Enabled
• Disabled
• Enabled
• ThinkPad LCD
• Analog (VGA)
• Digital on ThinkPad
• Display on dock
• Discrete Graphics
• Hybrid Graphics
Chapter 6
Comments
Enable the F1-F12 function
or the special function
printed as an icon on each
key as the primary function.
Enabled: Executes the F1-
F12 function.
Disabled: Executes the
special function.
To temporarily switch the
above two options, press
Fn+Esc to enable FnLock.
The FnLock indicator is on
when FnLock is enabled.
When the option is enabled,
you can press the Fn key to
keep it in a pressed
condition; then press the
desired function key. The
action is equivalent to
pressing the required key
simultaneously with the Fn
key. When you press the Fn
key twice, the state is
locked until you press the
Fn key again.
Select the display device
that is to be activated at
boot time. This selection is
effective for boot time,
password prompt, and
ThinkPad Setup.
Digital on ThinkPad is the
Mini DisplayPort on your
computer.
Display on dock is
DisplayPort, DVI or VGA
connectors on a docking
station.
Enable the Discrete
Graphics mode or the
Hybrid Graphics mode.
Discrete Graphics mode
provides better graphics
performance.
Hybrid Graphics mode
works as integrated
graphics and it consumes
less battery power.
.
Advanced configuration
69