5. Lock the battery latch.
6. Turn the computer over again. Connect the computer to ac power.
Installing or replacing the micro SIM card
Before you start, print these instructions. Read the important safety information first. See "Important safety
information" on page v.
Micro SIM card is a small plastic card with an Integrated Circuit (IC) chip mounted on one side of the card.
To install or replace the micro SIM card, do the following:
1. Disconnect the ac power from the computer and turn off the computer. Close the computer display and
turn the computer over.
2. Remove the removable battery. See "Replacing the removable battery" on page 113.
3. Gently push the micro SIM card to eject it
card
3
.
1
, and then slide it out of the slot
2
. Install a new micro SIM
.
Chapter 10
Replacing devices
115