Page 1
Dual Multimedia Headrest Replacement Entertainment System Quick Start Guide...
Page 2
NOTICES NOTICE OF INTENDED USE Rosen Electronics are designed to enable viewing of video ONLY for rear-seat occupants, and are not intended for viewing by the driver when the vehicle is in motion. Such use might distract the driver or interfere with the driver’s safe operation of the vehicle, and thus result in serious injury or death.
Page 3
For complete Owner’s Manual, please visit Rosen Electronics online at www.RosenElectronics.com...
Turning On The System A) Turn vehicle ignition to ON or ACC B) Press POWER on the front display or wireless remote on each system Front Panel Controls POWER/ENTER HOME/BACK DOWN EJECT PLAY/PAUSE RIGHT/NEXT SPEAKER LEFT/PREVIOUS...
Using The Headphones A) Turn on by pressing the OFF/ON button located on the ear piece. The power LED on the ear piece should illuminate. If not, check that the batteries are inserted properly and have a charge. B) The headphones each have a two-position slide switch labeled “Ch.A/ Ch.B”.
Playing A Disc A) Use the LEFT or RIGHT button to navigate to DVD mode. B) Press the ENTER button to select DVD source. C) With the label facing away, insert a disc into the disc slot. Do not force disc into slot.
Digital Media Player The USB/MicroSD sources can be used for media playback, such as video, audio and photos. Use the LEFT or RIGHT arrows to the next page. Use the UP or DOWN arrows to navigate the folder. 3/$<3$86( RU (17(5 WR VWDUW SOD\LQJ ¿OH RETURN to go back previous screen.
Adjusting The Display From the Home page, navigate to Settings and press Enter. Press the UP arrow button to brighten the screen or press the DOWN arrow button to dim the screen. Once you are done, press the BACK or HOME button to exit the SETTINGS.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: following two 1) this device may not cause harmful interference, and conditions: 2) this device must accept any interference received, including interference that may cause undesired operation.