SRAM level ultimate Service Manual page 15

5
Spray isopropyl alcohol on the caliper and clean it with a shop towel.
Visually check your work. If any of the o-rings protrude from the banjo fitting or banjo bolt, remove and replace the o-ring, then repeat the installation
process.
⚠ CAUTI ON
Servicing your brakes removes all of the fluid from the system. You must bleed the brakes after you service the brake caliper and/or lever. For brake
bleed, brake hose shortening, and brake pad replacement instructions, visit www.sram.com/service.
Caliper Piston Installation 15