Broan BQDD Series Installation Use And Care Manual page 16

7 ] For framed cabinet, secure the hood to the EZ1 brackets using a 10" drill bit and 4 no. 8-18 x
8 ] For frameless cabinet, secure the hood to the cabinet using 4 no. 8 x 5/8" round head wood
16
1/2" metal screws with washers (screws and washers included in parts bag). Insert 2 screws
and washers per side, in the slots (as shown in insets on illustration below).
screws (screws and washers included in parts bag). Insert 2 screws and washers per side, in
the slots (as shown in insets on illustration below).
FRAMED CABINET FRAMELESS CABINET
M
ETAL
S
CREWS
W
OOD
S
CREWS