Table of Contents
Advertisement
MP3/WMA mode
If you like your files to be in the correct or-
der, you should use burner software that
places files in alphanumerical order. If your
software does not provide this feature you
also have the option of sorting the files
manually. For this purpose, you must en-
ter a number in front of each file name, e.g.
"001", "002", etc. The leading zeros must
also be entered.
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 Kbit/sec.
This device can only play MP3 files that
have the ".MP3" file extension.
Notes:
To ensure uninterrupted playback,
•
do not try changing the file extension
to ".MP3" of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
•
Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
•
Do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-mode
CD, the device will only play the CD-
audio tracks.
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
Configuring the display
Configuring the default display
You can display various types of informa-
tion on the current track:
•
Directory number and track number
•
Directory number and time
•
Directory number and playing time
•
Track number and playing time
•
Track number and time
To switch between the different display op-
tions,
press and hold down the DISPL
ton
for longer than two seconds, to
switch the display.
Note:
After the MP3 scrolling text was
scrolled once after a track change, the
information is permanently shown on
the display.
but-
Hide quick links:
Advertisement
Table of Contents
