Total volume
Balance
The voice mode parameter allows you to combine different voices in various ways. For
example, the right side of the keyboard could be used to play a piano voice while the left
side plays a bass voice in split mode. Dual mode allows you to combine or layer sounds
such as two different components of a complex sound.
The next two parameters appear in the same LCD display. The total volume parameter
provides control over the total volume of a performance configuration.
0 Total volume is 0 (no sound will be heard at all).
99
Total volume is at maximum.
This allows you to obtain similar volume levels for all performance configurations.
The volume balance between voices A and B in the dual and split voice modes
is
adjusted
with this parameter. It does not appear
if
the single voice mode
is
selected.
- 50 Volume of voice A is maximum, volume of voice B is 0.
0
Both voices
A
and B are at their maximum volume.
+50 Volume of voice B is maximum, volume of voice A is 0.
The diagram below illustrates the relationship between the parameter values and the
actual balance.
§}Voice A
r
Volume
~VoiceB
; x ; x ; x x x x x
~x.
;x~;xx
~;xxx;x;xx
~
x x ; x ; x
~
-50
0
+50
~c.........-~-----Balance
Setting
--------•!1111>' I
A value of 0 will not necessarily achieve an equal volume level between the voices.
If
voice A is a "loud" sound and voice B is a "soft" sound by virtue of their respective
carrier levels, voice A will dominate if the balance is set to 0.
- 33-