Subaru 2014 TRIBECA Quick Reference Manual page 9

E
Head restraint adjustment
F
Seat heater
H
Folding down the seatback
J
Second-row centre seatbelt
K
Lower anchorages
For front seats and
second-row center seat:
To raise head restraint,
pull it up.
To lower, push it down while
pressing release button.
Press the button to
activate the seat heater.
Each subsequent press
of the button will reduce
the level.
1
For second-row seats:
Place the head restraint
for center seat in its
lowest position.
For third-row seats:
Pull the strap to lower
the head restraint.
2
Pull up the lever to release
the seatback lock, and fold
down the seatback.
G
Front / second-row seatbelt anchor height
I
Armrest
To fasten:
1
Pull seatbelt out of recess in the ceiling.
2
Connect webbing end to connector.
3
Fasten seatbelt in the usual way.
To disconnect connector from
the buckle, insert a key or other
hard, pointed object into the slot
in the buckle. See the Owner's
Manual Chapter 1 for details.
The lower anchorages (bars) are used for installing
a lower anchorages child restraint system.
Each lower anchorage is located where the seat
cushion meets seatback.
See the Owner's Manual Chapter 1 for details.
TRIBECA
For third-row seats:
To raise head restraint,
pull it up.
To lower, pull the strap.
To lower anchor height,
push release button
and slide anchor down.
To raise anchor height,
slide anchor up.
To lower armrest,
pull on the strap
of the armrest.
9