3Com AirConnect 9550 User Manual page 76

72 Diagnosing Problems
Solution (s)
To recover from this situation and continue configuring the Access
point:
1 Close your browser.
2 Return to the 3Com Wireless Infrastructure Device Manager and
click Refresh.
3 Select the device and click Configure to start a new configuration
session and set its IP address.
Symptom
The Wireless Network Tree does not appear in the 3Com Wireless
Infrastructure Device Manager window.
Solution (s)
Verify that you are using the correct network adapter. In the
device manager window, click Choose NIC. Select the network
adapter for the network you want to scan, and click OK.
Symptom
The Access point has a yellow exclamation point (!) next to it in
the Wireless Infrastructure Device Manager.