Channel / Frequency - 3Com AirConnect 9550 User Manual

System Configuration 39
The Super Dynamic mode allows automatic switching between
normal and turbo modes without modification by the user. The
feature increases throughput when bandwidth demands are
high. When bandwidth demands are low and at regular
intervals, normal mode allows legacy connectivity and new
associations. The Super Dynamic mode connection between the
Ethernet Adapter and the access point may turn to normal mode
connection if another station associates with the access point in
normal mode. The Super Static mode operates by using two
radio channels and does not switch to normal mode. Super Static
mode must be configured by the user on both the access point
and the station.
Note that in order to enable Super mode, the opposite client
service needs to provide the same specification.

Channel / Frequency

Select the channel for your wireless LAN in Channel/Frequency
block. The default setting is SmartSelect it selects the channel
which provides the best transmission quality. The frequencies
available vary depending which wireless mode you select.