Samsung SM-R260 User Manual page 36

Using the 360 Round
• E xposure Value: Adjust the exposure value. The exposure value is set automatically
depending on the balance of brightness in the composition or the position of the main
subject. Set the exposure value higher if the video is dark or set the exposure value lower
if the video is bright.
• I SO: The ISO image sensor determines the sensitivity to light. The higher the ISO, the
more sensitive the light is, so you can record bright videos in dark environments.
However, as the ISO increases, the grain will be rougher and the noise will increase.
– Limit: When Auto is selected in ISO, the maximum value of the ISO value is set and
can not be adjusted beyond its maximum value.
• S hutter Speed: The shutter speed determines the exposure time that the camera (image
sensor) accepts light.
• F number: Set the aperture size. The smaller the F value, the larger the diameter of the
diaphragm and more light is allowed to pass through to change the brightness of the
camera.
• M etering: Set the metering method. You can change the way light is measured on the
recording screen.
– Multi: Measure the light and apply the average value to the video using the camera
on the top and the 8 cameras on the right side.
– Center: Measure the light in front of and around the camera and apply it to your
video.
– Spot: Only the light from the camera you select will be measured and applied to the
video.
• G amma: Set the gamma value that controls the tone and color of the video.
– Normal: Set the gamma value as default.
– Gamma C: Set the contrast higher than the default value. The dark area will look
darker and the bright area will look brighter.
– Gamma DR: Set the dynamic value higher than the default value level to make the
screen looks wider.
• L uminance Level: Set the brightness range of the video.
– 0-255: Set the brightness range of the video to the maximum range.
– 16-235: Set the brightness range of the video to conform to the TV standard.
36