The Symbol - Toshiba TOSVERT VF-AS3 Instruction Manual

■ Screen display of [Standard mode]
This is the normal display mode of the inverter.
(1) - (6) are display contents common to [Standard mode], [Setting mode], [Easy mode], and [Monitor
mode].
(1)
(2)
(7)
(8)
(9)
(10)
(1) The operation status is displayed with the following symbols.
(Rotating): In operation (clockwise for forward run, counterclockwise for reverse run)
: Stop
(Blinking): Waiting for emergency off applied with the [STOP/RESET] key (when you
press the [STOP/RESET] key again while the symbol is blinking, the motor comes to an
emergency off)
(2) The operation status is displayed with the following text.
"RUN": During run
"STOP": Stopped
"Trip": Trip has occurred
"JOG": In jog run
(3) The frequency command value (default setting) is displayed in Hz. Set the display contents
with <F723: Status area display of operation panel>.
For details, refer to [5. 4. 3].
(4) The run commands are displayed with icons.
Run command from
Terminal
Operation panel,
Extension panel
Embedded Ethernet
RS485 communication
(connector 1)
RUN 20.0Hz
Standard Mode
20.0
Screen Copy Setting
Icon
F R
F R
F R
3-9
3. [Basic operation] Operation panel and screen display
E6582062
(4)
17:18
(6)
(5)
(3)
Hz
Monitor
Run / Stop
Stop
Fwd Run
Rev Run
Stop
Run
Stop
Run
Stop
Run
3
9
10