11
Entering seam programs
.01
Seam programs can be created by inputting parameters in the function "Create / correct
seam programs" or sewing a seam sample with the "Teach in" function. Irrespective of
which function is changed, the program number and basic settings of the sewing program
to be processed must fi rst be selected.
11
Basic settings for seam program input
.01.01
The basic settings are the same in the functions "Create/correct program" and "Teach in".
Switch the machine on.
Call up "Input" mode.
Call up the function "Create / correct seam program" and "Teach in".
Or change the selected program number and confi rm the selection.
Or input or change a comment.
Input
43