Voice Call Test - Huawei Ascend Maintenance Manual

Hide thumbs Also See for Ascend:

Table of Contents

Y210 Mobile Phone

Maintenance Manual

No.

11.2 Voice Call Test

To test the voice call function, perform the following steps:

Step 1 Install a UIM card and battery on the phone.

Step 2 Press the power button to power the phone on.

Step 3 Check whether the signal strength displayed on the LCD is normal (given that the network is

normal).

Step 4 Make a call to a fixed-line phone, and check the voice quality during the call.

If no problems are found, finish the voice call test. If any problems are found, troubleshoot

the phone or send it to an advanced service site for repair.

----End

Issue 1.0 (2012-11-28)

Item

Test Method

display the MAC addresses of the hotspots that have been found.

(Note: This test requires an active hotspot in the testing

environment.)

Press the volume down button to start the next test.

Displaying test

Display the MMI test results.

results

Failed test items will be listed.

Huawei Proprietary and Confidential

11 Functional Tests

Table of Contents

Y210