Fiat 500x User Manual page 69

Pushing the on/off button or turning the ignition switch to STOP erases the set speed
from memory.
Resume Speed
To resume a previously set speed, push the RES button and release. Resume can be used
at any speed above 20 mph (32 km/h).
Varying The Speed
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the SET (+) button.
The driver' s preferred units can be selected through the Uconnect system if equipped.
The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or
Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (+) button once will result in a 1 mph increase in set speed. Each
subsequent tap of the button results in an increase of 1 mph.
• If the button is continually pushed, the speed will continue to increase until the button
is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a 1 km/h increase in set speed. Each
subsequent tap of the button results in an increase of 1 km/h.
• If the button is continually pushed, the speed will continue to increase until the button
is released, then the new set speed will be established.
To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET (-) button.
The driver' s preferred units can be selected through the Uconnect system if equipped.
The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or
Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a 1 mph decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the speed will continue to decrease until the button
is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a 1 km/h decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the speed will continue to decrease until the button
is released, then the new set speed will be established.
OPERATING YOUR VEHICLE
67