Fiat 500x User Manual page 56

GETTING STARTED
Rear Seats
The split rear seat increases the storage of the rear cargo area.
NOTE:
• Prior to folding the rear seat down, it may be necessary to position the front seat to
its mid-track position. Be sure that the front seats are fully upright and positioned for-
ward, this will allow the rear seat to fold down easily.
• You may experience deformation in the seat cushion from the seat belt buckles if the
seats are left folded for an extended period of time. This is normal and by simply
opening the seats to the open position, over time the seat cushion will return to its
normal shape.
• It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a
collision, people riding in these areas are more likely to be seriously injured or killed.
• Do not allow people to ride in any area of your vehicle that is not equipped with
seats and seat belts.
• Be sure everyone in your vehicle is in a seat and using a seat belt properly.
Partial Enlargement Of Cargo Area
Enlargement of the left side of the cargo area allows you to carry a single passenger on
the right side of the rear seat, while the enlargement of the right side allows you to carry
two passengers.
Proceed as follows:
1. Remove the rear shelf (if equipped).
2. Fully lower the rear seat head restraints.
3. Move the safety belts to the outboard side of the seat and rest them on the seat belt guide.
4. Pull the seatback release lever to fold the left or right rear seatback completely forward.
54
WARNING!
Rear Seatback Release Levers