Power Button Board - HP Pavilion 15-bc000 Maintenance And Service Manual

Power button board

Description
Power button board
Power button board cable
IMPORTANT:
and replacement
Before removing the power button board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
5. Disconnect the cable from the battery.
6. Remove the hard drive (see
7. Remove the USB board (see
Remove the power button board:
Remove the Phillips screw (1), lift the power button board at an angle (2), and then remove it (3).
▲
Reverse this procedure to install the power button board.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Hard drive on page
USB board on page
32).
37).
47).
Spare part number
858974-001
858966-001