Midi Out - Peavey VYPYR PRO Operating Manual

Rear Panel continued
Level Knob
21
Adjusts the volume level of the MSDI™ going to the soundboard.
Ground Lift Button
22
Engage this switch if the mix engineer is hearing a hum in the MSDI™ output. This should eliminate the hum by
removing the ground loop.
MSDI™ XLR Direct Out
23
The MSDI™ XLR output allows direct connection to a soundboard or other audio device.
EFFECTS LOOP SEND and EFFECTS LOOP RETURN
24
1/4" output jack for supplying signals to external effects or signal processing equipment and 1/4" input for re-
turning signals from external effects or signal processing equipment.

MIDI OUT

25
Sends MIDI preset messages to any external MIDI device.
FOOTSWITCH/MIDI IN
26
This enables MIDI signals to be recieved from an external MIDI capable device (via 5-pin MIDI cable), and can
also be a means of plugging in the optional Sanpera PRO footswitch (via 8-pin DIN cable). Refer to the Vypyr
Pro MIDI SPEC download on the Vypyr Pro webpage on www.Peavey.com for detailed information on the MIDI
capabilities of the Vypyr Pro.
USB PORT
27
Allows interaction with a computer. This is important for software updates and operates as an audio source for
recording on computer. This USB port also connects the Vypyr Pro to your computer for use with the Vypyr
Edit program. Vypyr Edit can be found at http://peavey.com/vypyredit