Peavey VYPYR PRO Operating Manual page 4

VYPYR® PRO Quick Start
model 1 model 2
input
VYPYR ®
PRO-100
3
. Plug and Play
A
•Turn power/standby switches to "On" position. The standby switch is included so that you can play and
record with the power amp switched off.
•Plug in instrument.
•Selecting Presets–Use knob on far right of panel.
•Use outer bank wheel (1) to scroll through preset banks. Each bank contains four presets.
•Use inner knob (2) to find a preset. Press inner knob to select the preset.
B. Adjusting Presets
•Model Select
•Push model select button (3).
•Scroll(4) through Model Types (i.e. Stomp Box, instrument, effect or amp)
and press knob (4).
•Select modes for up to 4 models.
•Scroll through amp models, for example, and press the knob to select.
•With the model selected, the parameter knobs (5) will illuminate to display that model's current
settings.
•Adjust Model Parameters
• Press model you want to edit.
• The parameter knobs will illuminate to reflect that model's settings.
• Edit chosen model using the parameter knobs.
• The Vypyr Pro will remember your changes even if you change models until you save the preset.
• Delay/Reverb Quick Edit Menu
• Tap the Delay/Reverb Edit button (6)
•The main parameter knobs (5) now are controlling the parameters listed below the knobs which
NOTE: The Deep Edit Menu contains much more detailed tone shaping tools. In this menu you will find
submenus for Delay, Reverb, Input and Output settings. This menu is described in detail later in
this owner's manual.
C. VYPYR® Main Edit Menu
•To enter main menu, press inner preset button (2)
•Use either the outer bank wheel (1) or inner knob (2) to scroll through the following functions:
6
model 3 model 4
mode tap/ del/rev
select cancel edit
push to edit
HOLD HOLD
for tuner for adv. edit
4
include Delay Time Shift, Delay Level, Delay Feedback, Reverb Room Size and Reverb
Level.
Load Preset; Save Preset; Rename Preset; Rename Bank; Default Pedals; Assign Pedals;
Enable/Disable Midi Out; Midi Out Channel; Restore Preset; Factory Reset; Disable/
Enable Demo; Delay Trails On/Off; Reverb Trails On/Off; Show Version; Update Software;
Input Sensitivity; Exit Menu
5
pre low mid high
P1 P2 P3 P4
shift level feedback room size
delay
post master
P5
User Presets
6 7
5 8
4 9
3 10
2 11
1 12
0 13
aux in phones
level
reverb
on on
bank
(outer)
preset
(inner)
standby power
push to
select
HOLD for
MAIN menu
2 1