Table of Contents
Advertisement
Head
Shows the number of the hard disk read/write heads. This item is not
configurable.
Precomp
Shows the number of precomp per track. This item is not configurable.
Landing Zone
Shows the number of landing zone per track. This item is not
configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into the BIOS, use a
disk utility, such as FDISK, to partition and format new IDE hard disk
drives. This is necessary so that you can write or read data from the
hard disk. Make sure to set the partition of the Primary IDE hard disk
drives to active.
Drive A [1.44M, 3.5 in.]
Specifies the capacity and physical size of diskette drive A. Do not select
[None] if you are using a floppy disk drive. Configuration options: [None]
[1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
Halt On [
Sets the system to halt on errors according to the system functions
specified in each option. Configuration options: [All Errors] [No Errors]
[All, But Keyboard] [All, But Diskette] [All, But Disk/Key]
2-8
All, But Keyboard
]
Chapter 2: BIOS setup
Hide quick links:
Advertisement
Table of Contents
