Asus P5VDC-TVM Manual page 45

SATA Channel 2, 3 Master
While entering Setup, the BIOS automatically detects the presence of Serial
ATA devices. There is a separate sub-menu for each SATA device. Select a
device item then press <Enter> to display the SATA device information.
IDE Auto-Detection
Extended IDE Drive
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move Enter:Select
F5: Previous Values
Extended IDE Drive [Auto]
Select [Auto] to automatically detect a SATA hard disk drive. If
automatic detection is successful, Setup program automatically fills
in the correct values for the remaining fields (including Capacity,
Cylinder, Head, Precomp, Landing Zone, Sector) on this sub-menu.
Configuration options: [None] [Auto]
Access Mode [Auto]
Allows the user to select the sector addressing mode. Configuration
options: [Large] [Auto]
Before attempting to configure a hard disk drive, make sure you
have the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.
Capacity
Displays the auto-detected hard disk capacity. This item is not
configurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not
configurable.
ASUS P5VDC-TVM
Phoenix - Award BIOS CMOS Setup Utility
SATA Channel 2 Master
[Press Enter]
[Auto]
[Auto]
20021 MB
38792
16
0
38791
63
+/-/PU/PD:Value F10:Save&Exit
F6: Fail-Safe Defaults
Select Menu
Item Specific Help
To auto-detect the HDD's
size, head... on this
channel
ESC:Exit F1:General Help
F9: Optimized Defaults
2-7