Disconnecting Cables And Removing Accessories - Brother SB3734T Service Manual

Disassembly
1

Disconnecting cables and removing accessories

1. Disconnect the Power cord (if connected)
2. Remove the two screws (set screw, socket (CN) M3x4) to remove the two needles.
3. Remove the presser foot.
4. Remove the sub table.
Sub table
Presser foot
Set screw, socket (CN)
M3x4
Main frame / Covers / Upper thread guide
Fig. 2-1
2 - 3
Set Screw, Socket (CN) M3X4
Needle