2.
Pull down on the plastic tab, slide the Pick Up Roller to the left, and remove the K-clip.
3.
Pull the tab down and slide the Pick Up Roller to the right to remove it.
Note:
On the right side of the Pick Up Roller, there is a pick up roller bushing. When removing the
Pick Up Roller, be careful to not drop the bushing.
Xerox Internal Use Only
KL-Clip
Phaser 3320 and WorkCentre 3315/3325
Service Parts Disassembly
s3320-063
s3320-064
4-37
Service Manual