Before You Begin; Tools Required - Microsoft surface hub Unpacking Manual

INSIDE FRONT COVER
EN
Purpose
This document describes the unpacking process for your Microsoft Surface Hub 84". Great care has been taken in packing and shipping Surface Hub 84".
To protect it during unpacking:
• Keep Surface Hub 84" upright at all times.
• Unpack Surface Hub 84" in the same room where it will be mounted.
• Prepare the mounting stand before unpacking Surface Hub 84".

Before you begin

WARNING: Handling and site prep
To reduce the risk of injury due to the size and weight of the device, and because of the importance of keeping the device upright
• Microsoft Surface Hub and its shipping container may not fit into some elevators or stairwells. Before trying to move Microsoft Surface Hub to the
place where it will be installed, survey the site to determine how to safely move your Microsoft Surface Hub in its shipping container to the final
location where it will be unpacked and mounted
• Always have at least four people for unpacking and installation.
• Prepare the mounting system before unpacking the Microsoft Surface Hub
• Once Microsoft Surface Hub is unpacked, it will need to be mounted immediately. If you're mounting Microsoft Surface Hub onto a rolling stand,
lock or block the wheels of the stand before unpacking.
• Always have two people securing Microsoft Surface Hub upright throughout the unpacking process.
• Keep the assembly area clear of packing materials, and remove materials after each step.

Tools required

CAUTION: Use care with all tools when unpacking to avoid injury or damaging the Microsoft Surface Hub screen.
Use care with all tools while you're unpacking Surface Hub 84" to avoid cutting or damaging its screen. You'll need:
• Scissors for cutting straps, tape, and the silver anti-static packing bag.
• A 6mm hex wrench for detaching the shipping brackets.
1
K