Download
Share
Print this page
Microsoft surface hub Unpacking Manual
  1. Manuals
  2. Brands
  3. Microsoft Manuals
  4. Conference System
  5. Surface
  6. Unpacking manual
Microsoft surface hub Unpacking Manual

Microsoft surface hub Unpacking Manual

84"
Hide thumbs Also See for surface hub:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
Enlarged version
OUTSIDE BACK COVER
84" Unpacking Guide / 84" Guide de désemballage / 84" Guía de desembalaje
WARNING: Stop and read this guide before unpacking
Read and follow the instructions in this guide to unpack Microsoft Surface Hub 84". Failure to follow instructions and properly set up,
use, and care for this product can increase the risk of serious injury or death, or damage to the device.
This symbol identifies safety and health messages in this guide.
WARNING: Do not attempt repairs.
Doing so could present the risk of electric shock or other hazard. Heed all warnings and follow all instructions.
AVERTISSEMENT : Lisez bien ce guide avant de désemballer le produit.
Lisez et suivez les instructions de ce guide pour désemballer l'écran Microsoft Surface Hub 84". Le non-respect des instructions, la
mauvaise installation, la mauvaise utilisation et le mauvais entretien de ce produit peuvent augmenter le risque de blessures graves ou de
décès ainsi que de dommages à l'appareil.
Ce symbole identifie les messages de santé et de sécurité dans ce guide.
AVERTISSEMENT : Ne tentez aucune réparation.
ou ses accessoires. Cela pourrait entraîner un risque de choc électrique ou d'autre danger. Tenez compte de tous les avertissements
et suivez toutes les instructions.
ADVERTENCIA: Antes de desembalar los artículos, lea esta guía.
Lea y siga las instrucciones de esta guía para desembalar Microsoft Surface Hub 84". Si no se siguen las instrucciones y no se configura,
usa y cuida este producto de forma adecuada, puede aumentar el riesgo de lesiones graves o la muerte, o puede causar daños al dispositivo.
Este símbolo identifica los mensajes de seguridad y salud que figuran en esta guía.
ADVERTENCIA: No intente realizar reparaciones.
producto o sus accesorios. Hacer esto implica un riesgo de descarga eléctrica u otro peligro. Preste atención a todas las
advertencias y siga todas las instrucciones.
X19-95889-01
OUTSIDE FRONT COVER
Do not attempt to take apart, open, service, or modify the product or its accessories.
N'essayez pas de démonter, d'ouvrir, de réparer ni de modifier le produit
No intente desarmar, abrir, modificar o realizar mantenimiento de este
K

Advertisement

loading

Related Manuals for Microsoft surface hub

Summary of Contents for Microsoft surface hub

  • Page 1 ADVERTENCIA: Antes de desembalar los artículos, lea esta guía. Lea y siga las instrucciones de esta guía para desembalar Microsoft Surface Hub 84”. Si no se siguen las instrucciones y no se configura, usa y cuida este producto de forma adecuada, puede aumentar el riesgo de lesiones graves o la muerte, o puede causar daños al dispositivo.

  • Page 2: Before You Begin

    • Microsoft Surface Hub and its shipping container may not fit into some elevators or stairwells. Before trying to move Microsoft Surface Hub to the place where it will be installed, survey the site to determine how to safely move your Microsoft Surface Hub in its shipping container to the final location where it will be unpacked and mounted •...
  • Page 3 Pull the cardboard panel away from the shipping crate. c. Set the Welcome Kit aside. Note: This unpacking guide was attached to the front of the Surface Hub 84” shipping crate. The back of the crate should face the mounting system, which should already be in place.
  • Page 4 Unpack Surface Hub 84” Follow these steps to unpack Surface Hub 84”: CAUTION: To avoid potential injury, use caution when using scissors. 1. Using scissors, cut the plastic packing straps.
  • Page 5 2. After removing the straps and the four plastic clips, lift off the shipping crate lid. 3. Remove the shipping crate walls. a. Unclip and remove the four plastic clips at the base of the crate. b. Fold down the cardboard lips that attached the base to the sides of the crate. c.
  • Page 6 4. Remove and set aside the foam packaging. 5. Using scissors, cut away the anti-static bag at the base of the shipping container and lift the bag up and off Surface Hub 84”.
  • Page 7 6. Microsoft Surface Hub will be mounted to a temporary stand comprised of 2x8 wood cross-pieces that are attached to a steel vertical frame. Using a 6mm Hex wrench, remove the four lag bolts that secure the mounting brackets on the back of the device to the shipping container.

  • Page 8: What's Next

    Surface Hub 84”. Note: After Surface Hub 84” is mounted, be sure to keep the lifting handles so you can use them to move Surface Hub 84” to a new mounting location or if you need service in the future.

This manual is also suitable for:

Surface hub 84 inch