SwitchTip Installation
SwitchTip Installation
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from discharge. For exam-
ple, do not try to stop leaks with any part of the body.
1. Use spray tip (A) to insert OneSeal
(C).
C
B
2. Insert SwitchTip.
3. Screw assembly onto gun. Tighten.
ti2710a
Spray
1. Spray test pattern. Adjust pressure to eliminate
heavy edges. Use smaller tip size if pressure adjust-
ment can not eliminate heavy edges.
12
™
(B) into guard
A
ti13023a
ti13024a
ti18243a
2. Hold gun perpendicular, 10-12 in. (25-30 cm) from
surface. Spray back and forth. Overlap by 50%.
Trigger gun before moving and release after mov-
ing.
Clear Clog
1. Release trigger, put safety ON. Rotate SwitchTip.
Take safety OFF. Trigger gun to clear clog.
Never point gun at your hand or into a rag!
ti13131a
2. Put safety ON. Return SwitchTip to original position.
Take safety OFF and continue spraying.
ti13131a
ti18242a
ti113130a
ti13033a
ti13034a
ti13130a
332250A