Table of Contents
Advertisement
Updating inSentry Firmware from UNIX
To be able to upgrade the firmware using a UNIX operating system, you must have
the command tftp installed in your system.
For uploading of the new firmware to inSentry, execute the following command line:
tftp> binary
tftp> connect <host>
tftp> put <filename> upgrade@<password>@<username>
where:
binary
<host>
put
<filename>
upgrade
@
<password>, <username> : User Name and Password for read/write access
# tftp
: Binary data download mode
: inSentry IP address.
Example 172.168.1.18
: PUT command
: Name of the file containing the firmware image.
Example: /mnt/floppy/inSentry100.bin
: Upgrade key word
: Separator characters
41
Advertisement
Table of Contents
