Table of Contents
Advertisement
No Function
1. SysContact
2. SysName
3. SystemLocation
4. Poll Rate
After completing these settings, press "0" to return to the configuration menu.
Setting EMail Group
From the configuration menu press "3" to modify the SNMP identification
information, and the speed of reading data from inSentry (see Figure 2-12)
Figure 2-12 Parameter Group Configuration Menu
No Function
1. Mail Server
2. User Account
3. User Password
4. DNS IP Address
5. Daily Status Report
After completing these settings, press "0" to return to the configuration menu.
14
Description
Alphanumeric string
Alphanumeric string
Alphanumeric string
The time interval in seconds the inSentry
update measurement (Temperatures and
Humidity) from sensor, valid value is
between 3 to 60.
Description
As Administrator, you may enter the IP
Address or Hostname of a SMTP mail
server that will be used to send email
messages from the inSentry.
As Administrator, you may enter the User
Account of the mail server that will be used
by the inSentry to login mail server to
forward mails.
As Administrator, you may enter the User
Password of User Account.
As Administrator, you are required to enter
the IP address of your network DNS server
if you entered a Hostname for the Mail
Server. Otherwise, this field will contain
0.0.0.0.
If you intend to have the inSentry send a
Daily Status report to select email address
(Mail Accounts), you need to enter the time
of day in 24-hour format at which time you
want the email sent.
Example/Remark
Technical Support
Team
inSentry
Technical Support
Lab.
Example/Remark
Advertisement
Table of Contents
