Epson Home Cinema LS-100 User Manual page 64

Setting
Security
Passphrase
Channel
IP Settings
SSID Display
IP Address Display
Parent topic: Selecting Wireless Network Settings Manually
Options
Open
WPA2-PSK
WPA/WPA2-PSK
Various passphrases from 8 to
32 characters (from a web
browser, the maximum is 63
characters)
1ch
6ch
11ch
DHCP (On or Off)
IP Address
Subnet Mask
Gateway Address
On
Off
On
Off
64
Description
Selects the type of security used
on the wireless network
WPA2-PSK: uses WPA2 security
with AES for encryption. Use the
Passphrase value to establish a
connection from a computer
WPA/WPA2-PSK: uses WPA
personal mode; encryption is
dependent on the access point
settings; Passphrase must be
the same as the access point
Selects the pre-shared key used
on the network; passphrases are
case-sensitive. If the network
settings are reset after the
passphrase has been changed
more than once, the first
passphrase is restored.
In Quick connection mode,
selects the frequency band
(channel) used by the wireless
LAN
Selects DHCP if your network
assigns IP addresses
automatically, or turns off DHCP
so you can enter the network's IP
address, subnet mask, and
gateway address as needed
Selects whether to display the
SSID on the network standby
screen and Home screen
Selects whether to display the IP
address on the network standby
screen and Home screen