Epson Home Cinema LS-100 User Manual page 170

On/Standby Status light
light
Off Flashing blue
Off Flashing blue
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Laser light Temp light
Orange Off
Off Flashing
orange
Flashing Off
orange
Flashing Flashing
orange orange
Orange Orange
170
Status and solution
Laser has a problem.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the
projector and contact Epson for
help.
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Obstacle detection warning. A beep
sounds and you see an obstacle
warning. The projector turns off
automatically if you take no action.
• Remove any obstacles interfering
with the projection window.
• Clean the obstacle sensor.
If the problem persists, turn the
projector off, unplug it, and contact
Epson for help.
Obstacle detection error. Turn the
projector off, unplug it, and contact
Epson for help.