Table of Contents
Advertisement
Section 4 - Configuration
MAC Address
The default MAC address is set to the Internet port's physical interface
Clone:
MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
VLAN:
For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 36.
Click Save when you are done.
Static IP
IP Address:
Enter the IP address provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
The default MAC address is set to the Internet port's physical interface
Clone:
MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
VLAN:
For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 36.
Click Save when you are done.
D-Link DIR-883 User Manual
PPPoE (continued)
Address Mode:
'\QDPLF ,3
6HUYLFH 1DPH
3ULPDU\ '16 6HUYHU
6HFRQGDU\ '16 6HUYHU
MTU:
Auto
Mac Address Clone:
<< MAC Address
9/$1
'LVDEOHG
&23<5,*+7 ‹ '/LQN
Address Mode:
6WDWLF ,3
IP Address:
6HUYLFH 1DPH
3ULPDU\ '16 6HUYHU
6HFRQGDU\ '16 6HUYHU
MTU:
Auto
Mac Address Clone:
<< MAC Address
9/$1
'LVDEOHG
&23<5,*+7 ‹ '/LQN
29
Advertisement
Table of Contents
