On Fast Ethernet Ports - Avaya Cajun P550 Manager 5.1 User Manual

Configuring
Physical Port
Parameters on
Fast Ethernet
Ports
Cajun P550/P880 Manager User Guide
Configuring the Cajun Switch Using the P550/P880 Manager
To configure ports for a Fast Ethernet module in the Detailed
Physical Port Configuration dialog box:
1. Start Cajun P550/P880 Manager. For information about
starting the Cajun P550/P880 Manager, refer to "Starting the
Cajun P550/P880 Manager" earlier in this chapter.
2. Double-click a Fast Ethernet port in the switch
representation.
Or
Right-click a Fast Ethernet port in the switch representation,
and select Port Configuration from the pull-down menu.
The Detailed Physical Port Configuration dialog box of the
Cajun Switch Web Agent opens (Figure 2-7).
* Notes:
• Refer to Table 2-4 for more information on the Fast
Ethernet (10/100) parameters.
• If necessary, use the panel divider to resize the system
information panel.
Table 2-4. Fast Ethernet (10/100) Port Parameters
Parameter Definition
Name A user-assigned name for this port (possibly a drop
name or the name of the station or other device
connected to the port).
Category Allows you to select either User Port or Service
Port:
• The User Port is intended for use with switch
connections to end user nodes.
• The Service Port is intended for use with
switch connections to servers or other
switches. The Service Port allows the switch
to generate both log messages and alarm
messages (traps). The User Port only
generates log messages, preventing your
network management station from being
overwhelmed by port up/down messages that
result from users turning workstations on and
off.
2-25