Program Play - Panasonic SC-HC400 Owner's Manual


≥ To use this unit's remote control with a Bluetooth
Bluetooth device must support AVRCP (Audio Video
®
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
≥ [CD], [USB]: Tracks can be selected by pressing the numeric
buttons.
≥ Maximum number of displayable characters:
Approx. 32
≥ This system supports ver. 1 and 2 ID3 tags.
≥ Text data that is not supported will not be displayed or will be
shown differently.
Playback modes (
Select the playback mode.
1
Press [PLAY MENU] repeatedly to select
"PLAYMODE" or "REPEAT".
2
Press [2, 1] to select the setting and then press
[OK].
PLAYMODE
OFF Cancels the play mode setting.
PLAYMODE
1-TRACK Only plays the selected track.
≥ "1", " " is displayed.
(Skip to the desired track.)
1-ALBUM Only plays the selected album.
≥ Press [3] or [4] to select the album.
≥ "1", "
RANDOM Plays the contents randomly.
≥ "RND" is displayed.
1-ALBUM Plays the tracks in the selected
RANDOM album randomly.
≥ Press [3] or [4] to select the album.
≥ "1", "
REPEAT
ON REPEAT Turns on repeat mode.
≥ "`" is displayed.
OFF Turns off repeat mode.
REPEAT

≥ During random playback, you cannot skip to tracks which
have been played or press the numeric buttons.
≥ Playmode function does not work with "Program play".
≥ The mode is canceled when you open the sliding door or
remove the USB device.
10
TQBJ2049
device, the
®
, )
[CD] [USB]
" is displayed.
", "RND" is displayed.

Program play

( )
[CD], [USB]
This function allows you to program up to 24 tracks.
[CD] (CD-DA)
1
Press [PROGRAM] in the stop mode.
≥ "PROGRAM" is shown for a few seconds.
2
Press the numeric buttons to select the desired
track.
≥ Do this step again to program other tracks.
3
Press [1/;] to start playback.
[CD] (MP3), [USB]
1
Press [PROGRAM] in the stop mode.
≥ "PROGRAM" is shown for a few seconds.
2
Press [3, 4] to select the desired album.
3
Press [9] and then press the numeric buttons to
select the desired track.
4
Press [OK].
≥ Do steps 2 through 4 again to program other tracks.
5
Press [1/;] to start playback.
Check Press [:] or [9] in the stop
program mode.
contents
Clear the last Press [DEL] in the stop mode.
track
Cancel Press [PROGRAM] in the stop mode.
program ≥ "PGM OFF" is shown for a few seconds.
mode
Clear all Press [∫] in the stop mode. "CLEAR
programed ALL" is shown. Within 5 seconds, press
tracks [∫] again.

≥ The program memory is cleared when you open the sliding
door or remove the USB device.