Acer AcerPower APM6 Service Manual page 51

Parameter
HDD Power Down
HDD Down In Suspend
Soft-off by PWR/BTTN
WOL (PME#) From Soft-
Off
USB Resume from S1/S3 Enable or Disable USB device (USB K/B or
Resume by Alarm
POWER ON Function
PWRON After PWR-Fail
Chapter 2
Description
This setting controls how long a hard disk drive
must be left idle before it spins down.
Enables or disables the functionality of HDD
down in suspend.
When Enabled, turning the system off with the
on/off button places the system in a very low-
power-usage state, with only enough circuitry
receiving power to detect power button activity or
Resume by Ring activity.
This category enables or disables wake-on-Lan
from soft-off
Mouse) wake up system from S1/S3.
You can set "Resume by Alarm" item to enabled
and key in Data/Time to power on system
Select the method to power on the system.
This field allows you to determine the power
status to on/off or former-sts after the system.
Options
Disabled
Standby
Suspend
Enabled
Disabled
Instant-off: Press down
button then power off
instantly
Delay 4 Sec.: Press power
button 4 sec. to power off.
Enter suspend if button is
pressed less than 4 sec.
Enabled
Disabled
Enabled
Disabled
Disabled: Disable this
function
Enabled: Enable alarm
function to Power On
system
If RTC Alarm Lead To
Power On is Enabled.
Date (of Month) Alarm:
Everyday, 1~31
Time (hh:mm:ss) Alarm:
(0.~23):(0~59):(0~59)
Button Only
Keyboard 98
Hot Key
Mouse Left
Mouse Right
FORMER-Sts
On
Off
42