Accessing Saved Measurements From A Pc - Vox -01 Operating Manual

Remote control from a PC
In certain situations you may wish to control your VOX-01 remotely from a PC. To
achieve this, keep the VOX-01 connected via USB, and run the "Remote Display"
application under Windows. This application works on any 64-bit version of Windows.
A self-extracting installer of the application is included on the flashdrive bundled with
your device, and can also be downloaded from our website.
The remote display application does exactly what the name says: you will get the exact
same controls that you have on the VOX-01 device itself, but the entire display is
simply moved to a window on your PC.
The Remote Display application needs to have the exact same firmware
version that your VOX-01 is running on. Make sure that you use the
correct installer package for your model, and follow instructions in the
installation process.
When you first run the application, you will have to choose the correct COM port (as as-
signed by Windows to the VOX-01). If you select the wrong port, or if you want to change
the COM port setting later on, press TAB from within the Remote Display application. You
can now select any of the available COM ports on your PC.
The resolution of the display is 240x320 pixels. You can stretch the window of the Remote
Display application to enlarge it. It may be convenient to use an enlarged version of the
display (e.g. in classroom settings), but while increasing the size, the resolution remains
240x320. It is therefore normal for the enlarged display to look somewhat blurry.
All functions on touch screen on the VOX-01 are temporarily disabled as soon as a
connection to the Remote Display application is made. Touch the display to return
control to the VOX-01
Always make sure that you are using high-quality USB cables, especially
when operating with a long cable between the VOX-01 and your PC. Most
USB connection issues are traced back to poor quality cables.
VOX-01 Operating Manual
37