Panasonic WV-CW370 Service Manual page 9

8 Referring to Fig. 2-7, remove two screws that secure the
Front Unit and remove the Front Unit from the Main Unit
of the Camera.
8 Disconnect the connector CN1 on the Main Board and
remove the Flexible Flat Cable.
8 Disconnect the connector CN3 on the Main Board and
remove the Wire Ass'y.
Main Board
Flexible Flat Cable
Front Unit
Fig. 2-7
8 Referring to Fig. 2-8, remove two screws that secure the
Main Board and remove the Main Board from the Main
Unit of the Camera.
Remove two screws.
Fig. 2-8
8 Reconnect the Wire Ass'y of the Raer Esutcheon to CN6
on the Power 2 Board.
8 Reconnect the Wire Ass'y of the Raer Esutcheon to CN1
on the Power 1 Board.
8 Reconnect the Flexible Flat Cable and the Wire Ass'y of
the Front Unit to CN1 and CN3 on the Main Board.
Remove two screws.
CN1
Main Unit of
the Camera
CN3
Wire Ass'y
Main Unit
of the Camera
Main Board
3. Optical Ass'y Replacement
Procedure
8 Remove the Front Unit from the Camera while referring to
the item 2. Disassembling Procedure for Adjustment.
8 Referring to Fig. 3-1, remove two screws that secure the
Sensor Board and remove the Sensor Board from Front
Unit.
8 Disconnect the connector CN300 on the Sensor Board
and remove the Wire Ass'y.
8 Remove the Optical Ass'y (IC20) from the Sensor Board.
Wire Ass'y
2-3
Remove
two screws.
Optical Ass'y (IC20)
CN300
Sensor Board
Front Unit
Fig. 3-1