Y/C Circuit - Philips DVP721VR Service Manual

4. Y/C CIRCUIT

(1) No Video in EE Mode,
No Video in EE Mode
Does the Video signal
appear at the IC301 Pin48?
YES
Is 5V applied to the IC301
Pins18, 24, 42, 55, 72, 91?
YES
Does the Video signal
appear at the IC301 Pin65?
YES
Does the Video signal
appear at the IC501 Pin19?
YES
Does the Video signal appear
at the Emitter terminal of the
Q309, IC802 Pin 30?
NO
Check the 19Pin of Tuner.
NO
Check the 5.0VT, 5.3VA
Line. (Power Circuit)
NO
Is I 2 C BUS signal applied to
the IC301 Pins68, 69?
YES
Chck the path of the signal
NO
between the IC301 Pin65
and IC501 Pin17.
Does the 12VT, 5.3VA appear
NO
at the Emitter terminal of the
Q309 IC802 Pin 2, 4.
Replace the Q309, IC802.
3-11
NO
NO
YES
Check the System Circuit.
(Refer to 'SYSTEM I 2 C BUS
CHECK Trouble Shooting')
Check C316. (AGC)
YES
Replace the IC301.
Check the 12VT, 5.4VA
Line. (Power Circuit)